How does our trap work?
Our traps are a little different from other pest traps, as they use CO2 gas which allows the trap to automatically reset. They were a world first, so it’s no surprise if it’s a little confusing to understand how they work.
Here we step through exactly how a Tyfyna trap works, and what’s going on inside. This might help you if you’re thinking something’s not quite right with your trap, or give you some more insight if you’re considering purchasing a trap.
It all starts with a sniff
One of the most critical steps in the entire trapping process is providing a lure that your target animal loves the smell of. If the lure inside your trap doesn't smell fresh you won't drum up any interest (no matter how good the trap is!).
We’ve developed a specialized long-life lure, which when used in our Automatic Lure Pump (ALP) can be consistently dispersed over a period of six months. Because it’s constantly pushing out the fresh lure, it means the trap always smells good to your target pest.
The live trap
The design of our mouse and rat trap was a long process, and many years of research and development were undertaken to get it where it is today. The addition of CO2 gas was one of the largest breakthroughs the team had on that journey.
Co-founder Craig, was mountain biking with his daughter when he discovered he had a flat tire. He asked around for a pump, and while no one could offer a pump, a fellow rider gave Craig a small gas canister, full of CO2. With one swift action, the tube was full and the pressure was high - it sparked an idea.
When the canister is screwed into a Tyfyna trap, the gas from within fills a chamber inside the trap, creating immense pressure. This is what gives the striker its bang! When the trigger is released, so too is the pressure, and it fires the striker, activating the trap.
Once the trap has fired, the valve which has just released the gas shuts off and closes. The gas will refill and again the pressure will build, making your trap ready for the next time it goes off.
Don’t touch the trigger
You’ll see in the video above, a thin wire sits in the chamber of the trap. This is the trigger, which lets the trap know that there’s an animal within. As the animal climbs up towards the bait, it grazes past the trigger and activates the release of gas, which as we know, releases the striker and kills the animal.
Strike time
The striker is what does all the damage within our mouse and rat trap. It’s a strong strike to the head of a pest, caught in the trap. This causes them to die immediately, and humanely.
We’ve done extensive testing to ensure that the striker in our traps goes off every time, without fail. Whenever there is a pest in your trap next, you can trust that the trap will do its job, and the animal will not suffer.
The reset
One of the best things about Tyfyna traps is that they reset automatically. When the pressure has fully released, the striker returns to its starting position. Once the striker has retreated to its initial position, the chamber can refill with gas, raising the pressure within the trap and preparing it to strike again.
While it’s very different from a trap you may have worked with, in the past, Tyfyna traps are a reliable, sustainable solution for your pest problem. If you’re interested in learning more, or have questions about your own trap - get in touch! We’d love to hear from you. You can email us at support@tyfyna.com
Self-Resetting, CO2 Powered
The rat or mouse triggers a spring-loaded striker as it approaches the lure housed in the trap. Quick kill, no electricity, no toxins. Get constant control of your rat or mouse population.
Why Order From Us?
We strive to achieve 100% customer satisfaction. If you aren't satisfied for any reason, contact us within 30 days of receiving your antenna and we will resolve it or receive a full refund.
